oemhp_rawvspportturns up zero hits as of this date.
However, by logging into a DL380 G62 ILO-2 CLI console, you can see this setting:
>hpiLO-> show /map1/config1
status=0
status_tag=COMMAND COMPLETED
/map1/config1
Targets
Properties
oemhp_mapenable=yes
oemhp_timeout=30 minutes
oemhp_passthrough=disabled
oemhp_rbsuenable=yes
oemhp_rbsulogin=no
oemhp_rbsushowip=yes
oemhp_telnetenable=yes
oemhp_httpport=80
oemhp_sslport=443
oemhp_rcport=23
oemhp_vmport=17988
oemhp_tsport=3389
oemhp_sshport=22
oemhp_sshstatus=yes
oemhp_serialclistatus=yes
oemhp_serialcliauth=yes
oemhp_serialclispeed=115200 bits/sec
oemhp_minpwdlen=7
oemhp_hotkey_t=NONE
oemhp_hotkey_u=NONE
oemhp_hotkey_v=NONE
oemhp_hotkey_w=NONE
oemhp_hotkey_x=NONE
oemhp_hotkey_y=NONE
oemhp_high_perf_mouse=automatic
oemhp_enforce_aes=no
oemhp_authfailurelogging=3
oemhp_computer_lock=disabled
oemhp_rawvspport=3002
oemhp_console_capture_port=17990
oemhp_console_capture_enable=no
oemhp_interactive_console_replay_enable=no
oemhp_capture_auto_export_enable=no
oemhp_capture_auto_export_location=http://192.168.1.1/REDLOF/capturePCThPCTt.ilo
oemhp_capture_auto_export_username=0
oemhp_capture_auto_export_password=0
oemhp_console_capture_boot_buffer_enable=no
oemhp_console_capture_fault_buffer_enable=no
oemhp_shared_console_enable=no
oemhp_shared_console_port=0
oemhp_key_up_key_down_enable=yes
Verbs
cd version exit show set oemhp_loadSSHkey
And as you can plainly see,
oemhp_rawvspport appears therein.
